The Mom I Want to Be

Cardboard tubes

Pipe cleaners

Ruler

Pencil

Scissors

Hole punch

Thread or string

 

For each ornament, flatten a 7 1/2-inch length of cardboard tube. Mark and cut it into 3/4-inch-wide rings; you’ll need 10 for this project. On each flattened ring, mark dots 3/4 inches in from each folded edge. With a hole punch, make holes at the dots. Starting with the inner circle, string the rings onto a pipe cleaner. For the outer circle, twist two pipe cleaners together to make a double-long piece, then thread it through the outer holes in the cardboard rings. Twist the ends together and trim the excess. Hang with thread or string.